Airbot Mini Carrier Board & PDB for CUBE
Airbot Mini Carrier Board & PDB for CUBE
Create a new review
3
SKU:
N/A
- True Stock of Products
- Fast & Free Shipping*
- Secure Payment
The Airbot Mini carrier board is one of the way to install a Cube on a drone. The Mini carrier board encapsulate all the wiring in a 50.5x57.5mm board, in order to save space and weight for applications which have size limits.
The Airbot Power Distribution Board Set can be installed directly under Airbot Mini carrier board set. The PDB allows up to 180A through ESC interface and four pairs of low power pads (2 on top/ 2 on bottom). The mounting hole are aligned with Airbot carrier board, so the board can be stacked together while separated by small nylon spacers.
Features:
- Dual power inputs (redundant power with automatic switch to the second power source when first one fails)
- Easy to install on drone (see the mounting pattern above)
- Power distribution & voltage protection (providing current to each connector)
- Motor PWM signal distribution (up to 8 motors - distributed on corners)
- Standard 2.54mm servo PPM/S.BUS/Spectrum RC input (+5v/+3.3v selectable power from carrier board)
- AUX VCC pins are connected together. This allows powering the AUX rail externally.
<p>The Airbot Mini carrier board is one of the way to install a Cube on a drone. The Mini carrier board encapsulate all the wiring in a 50.5x57.5mm board, in order to save space and weight for applications which have size limits.<br></p><p><br></p><p>The Airbot Power Distribution Board Set can be installed directly under Airbot Mini carrier board set. The PDB allows up to 180A through ESC interface and four pairs of low power pads (2 on top/ 2 on bottom). The mounting hole are aligned with Airbot carrier board, so the board can be stacked together while separated by small nylon spacers.<br><b><br></b></p><p><b><br></b></p><h4><b>Features:</b></h4><h4><span style="font-weight: bold;"><br></span></h4><ul><li></li><li>Dual power inputs (redundant power with automatic switch to the second power source when first one fails) </li><li>Easy to install on drone (see the mounting pattern above) </li><li>Power distribution & voltage protection (providing current to each connector) </li><li>Motor PWM signal distribution (up to 8 motors - distributed on corners) </li><li>Standard 2.54mm servo PPM/S.BUS/Spectrum RC input (+5v/+3.3v selectable power from carrier board) </li><li>AUX VCC pins are connected together. This allows powering the AUX rail externally. </li></ul><p><img src="/web/image/387818/airbot-mini-carrier-board-pdb-pin.jpg?access_token=48ba3d46-3750-4a5b-b55a-30225a4bb047" class="pull-left" style=""><br></p>
Suggested Products
CubePilot Pixhawk 2 The Cube Orange FD
CubePilot Pixhawk 2 The Cube Purple
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products
To install this Web App in your iPhone/iPad press 
and then Add to Home Screen.
